усе раздзелы

Галоўная> вытворчая лінія > Блокі цырконія

Белы цырконій

Белы цырконій

Белы дыяксід цырконія - гэта матэрыял без металу для эстэтычнай рэстаўрацыі, які сертыфікаваны як біясумяшчальны, надзвычай трывалы матэрыял, які выкарыстоўваецца сёння ў стаматалогіі.

Звяжыцеся з намі
Паказанні:

Restorations are available with monolithic full contour crowns, bridges, veneers or full arch.


Белы цырконій

  • Асаблівасці
  • аксэсуары
  • тэхнічныя характарыстыкі
  • Інфармацыя пра запыты
Features of White Zirconia

The preshaded zirconia that covers all 16 shades of the VITA Classic shade guide,  With pre-shaded zirconia there is no need for laboratory technicians to shade each unit, saving production time.


  • 1
    Consistent VITA® Classic Shade Match

    Strictly follow up VITA® Classic Shade from the R & D phase and also by the standard production with shade match.

  • 1
    Glazed with Bloomden CeramStar Glaze/Stain Kit

    Preparation: Multilayer crown bridge after milled and sintered and then glazed.

  • 1
    Incisal Translucency and appearance

    The translucency of preshaded zirconia and the additional light refraction from the preshaded zirconia phase results in a natural incisal translucency.


Accessories for White Zirconia
  • КерамStar® Glaze/Stain Десневой Усталёўка

    It contains 4 single masses as well as special liquids and accessories. The 3D pastes were specially developed for the aesthetic finalization and characterization of the gingival-colored parts of ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    Даведацца больш
  • accessories分辨率
    КерамStar® Glaze/Stain Vivid Set

    It contains 7 single masses as well as special liquids and accessories. The 2D pastes were specially developed for the basic aesthetic finalization of the ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    Даведацца больш
  • accessories分辨率
    КерамStar® Glaze/Stain Blossom Set

    It contains 17 single masses as well as special liquids and accessories. The 2D and 3D pastes and stains were specially developed for the professional aesthetic finalization of ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    Даведацца больш
White Zirconia Technical Specifications
Тэхнічныя характарыстыкі

UT ST-Plus
ST ШТ
ZrO2+HfO2+Y2O3 ≥ 99% ≥ 99% ≥ 99% ≥ 99%
Y2O3 9%-10% 7.0%-7.8% 4.5% -6.0% 7.0%-7.8%
Al2O3 < 0.05% < 0.15% < 0.15% < 0.15%
Density before sintering (g.cm-3) 3.20 0.05 ± 3.15 0.05 ± 3.15 0.05 ± 3.15 0.05 ±
Density after sintering (g.cm-3) 6.06 0.01 ± 6.08 0.01 ± 6.09 0.01 ± 6.08 0.01 ±
CTE (25-500°C) (K-1) 10.5 0.5 ± 10.5 0.5 ± 10.5 0.5 ± 10.5 0.5 ±
Flexural strength after sintering (MPa) > 600 > 1000 > 1200 > 1100
Aging surface monoclinic phase content < 15% < 15% < 15% < 15%
Прапускальнасць святла < 49% < 46% < 43% < 47%
Chemical solubility after sintering (µg.cm-2) <100 <100 <100 <100
Цытатоксічнасць Узровень 0 Узровень 0 Узровень 0 Узровень 0
Radioactivity (Bq.g-1) <0.1 <0.1 <0.1 <0.1
Sintering temperature (°C) 1470-1530 1480-1530 1500-1530 1500-1530
сістэмы 98 мм / 95 мм / 92 * 75 мм
Таўшчыня 12m / 14mm / 16mm / 18mm / 20mm / 22mm / 25mm
Адценні A1 A2 A3 A3.5 A4 / B1 B2 B3 B4 / C1 C2 C3 C4 / D2 D3 D4

 



Інфармацыя пра запыты